德国赛卡SEIKA 动态加速度计 加速度传感器BDK3,BDK10,BDK100
长期供应德国赛卡seika加速度传感器（加速度计）、倾角（倾斜）传感器（倾角计）
详情请致电深圳市莱逸电气有限公司电话：0755-26505588
德国赛卡seika公司加速度传感器：b1、b2、b3/bdk3、bdk10、bdk100
加速度传感器-静态（低限截止频率=0hz）：b1、b2、b3
集成电路设计，可抗很高强度的振动，用于静态测量频率从零到数百赫兹的振动
-测量范围：±3g，±10g，±50g（换算公式：1g=9.81m/s2）
-分辨率：<0.001g，<0.005g，<0.02g
-频率范围：0-160hz，0-350hz，0-550hz
-输出：仿真电压dc/数字pwm
-供电电压：5vdc（允许范围3v~6v）
-工作温度：-40℃~+85℃（125℃可选）
-防护等级：ip65
加速度传感器-动态（低限截止频率=1 hz或10hz）：bdk3、bdk10、bdk100
集成电路设计，可抗很高强度的振动，用于动态测量频率从零到数千赫兹的振动
-测量范围：±3g，±10g，±100g（换算公式：1g=9.81m/s2）
-分辨率：<0.001g，<0.005g，<0.05g
-频率范围：1-300hz，1-800hz，1-1500hz
-输出：仿真电压dc
-供电电压：5vdc（允许范围2v~6v）
-工作温度：-40℃~+85℃
-防护等级：ip65
德国赛卡seika传感器选型汇总：
static accelerometers (lower cut-off frequency = 0 hz)
| model | measuring range | resolution |
| b1, b2, b3 | ±3g, ±10g, ±50g ( 1g = 9.81ms-2 ) | <0.001g, <0.005g, <0.01g |
dynamic accelerometers (lower cut-off frequency = 1 or 10 hz)
| model | measuring range | resolution | frequenzy range |
| bdk3 | ± 3 g | < 10-3 g | 1...300 hz |
| bdk10 | ± 10 g | < 5*10-3 g | 1... 800 hz |
| bdk100 | ± 100 g | < 1*10-2 g | 1... 1.5 khz |
inclinometers
| model | measuring range | resolution |
| nb3 | ±10° (±20°) | <0.001° |
| na2-05, na2-10 na3-30 na4-45, na4-70 | ±5°, ±10° ±30° ±45°, ±70° | <0.001grad, <0.002grad <0.005grad <0.01grad, <0.01grad |
| n2, n3, n4 | ±10°, ±30°, ±70° | <0.001°, <0.005°, <0.005° |
| ng2, ng3, ng4 | ±10°, ±30°, ±80° | <0.001°, <0.005°, <0.005° |
| ng...i | inclinometer type ng2, ng3, ng4 with integrated 4...20ma signal conditioner | |
| ng...u | inclinometer type ng2, ng3, ng4 with integrated 0...5v signal conditioner | |
| ng360 | inclinometer with 360° measuring range and integrated microprocessor and rs485 interface | |
sensor boxes (for harsh operating conditions)
| model | features |
| sb1i | sensor box (98 x 64 x 56mm3) with one integrated seika sensor of any type and one integrated signal conditioner with 4...20ma output. |
| sb2i | sensor box (98 x 64 x 56mm3) with two integrated seika sensors of type b, bd, bdk, n or nb and two integrated signal conditioners with a 4...20ma output each. both channels are electrically isolated from each other. |
| sb1u | sensor box (98 x 64 x 56mm3) with one integrated seika sensor of any type and one integrated signal conditioner with 0...5v output. |
| sb1s | sensor box (98 x 64 x 56mm3) with one integrated seika sensor of any type, one integrated signal conditioner with 0...5v output and two open collector switch outputs that respond to traversing of adjustable thresholds. |
| sbs1u | sensor box (98 x 64 x 56mm3) with one integrated seika-servo-inclinometer for measuring small angles of up to 2 degrees with very high resolution and an integrated signal conditioner with 0...5v output. |
| sb360 | sensor box (98 x 64 x 56mm3) with one integrated seika sensor of type ng360, internal microprocessor and rs485 interface. |
| sbg2u | sensor box (124 x 80 x 58mm3) with two integrated seika sensors of type ng and two 0...5v outputs. |
| sbg3i | sensor box (124 x 80 x 58mm3) with three integrated seika sensors and three integrated signal conditioners with 4...20ma output. |
| sbl1 | sensor box (180 x 180 x 100mm3 - large and robust) with one integrated seika sensor of any type and one integrated signal conditioner with 4...20ma output. |
| sbl1s | sensor box (180 x 180 x 100mm3 - large and robust) with two integrated seika sensors of any type, one integrated signal conditioner with 4...20ma output, one integrated signal conditioner with 0...5v output and two safety relays that respond to traversing of adjustable thresholds. the sbl1s has two redundant, electrically isolated measuring channels for safety related applications. |
| xb.. | extra robust, pressure-, saltwater- and corrosion-proof stainless steel sensor box (ø120 x 50) as an alternative to the sb.. housings (180 x 180 x 100mm3) for especially harsh operating conditions, aggressive fluids and saltwater. |
| sc485b | box (63.5 x 58 x 35mm3) with rs485/rs232 converter for operation of inclinometers ng360, sb360, and xb360 from a rs232 port. |
sensor accessories
| model | features |
| nv4a | filtering signal conditioner for sensor signal matching with symmetrical +/- 4 v voltage output |
| nv6a | filtering signal conditioner for sensor signal matching to a 4...20ma, 2-wire interface |
| nv8a | filtering signal conditioner for sensor signal matching with an asymmetric 0...5v output voltage |
| sw3 | sensor cube for multiaxial arrangement of seika accelerometers and/or seika inclinometers |
| sbbs, sbbb, sbbw | fixing plates from stainless steel for sensor boxes sb.. |
德国赛卡seika动态加速度计（加速度传感器）产品详细信息：
features
- very high overload resistance
- insensitive to interference by magnetic and electric fields
- multiple housing options
- light weight
- linear frequency response with little or no resonant peak at upper cut-off frequency
- low non-linearity
- small lower cut-off frequency
- high signal-to-noise ratio
- hermetically sealed
- low transverse sensitivity
- high long-term stability
- integrated sensor electronics
- low output impedance
- long connection lines possible
description
the dynamic accelerometers bdk3, bdk10, and bdk100 are capacitive spring-mass accelerometers with integrated sensor electronics. resonant peaks are minimized by dynamic gas damping in the primary transformer.
the sensor electronics require only minimal power and are in conjunction with the capacitive primary transformer characterized by low error and high long-term stability.
application
the accelerometers bdk3, bdk10, and bdk100 are used for applications re high overload resistance, high long-term stability, small lower cut-off frequency, light weight and low power consumption. typical applications include:
- measurements on vehicles, machinery, buildings and plants for process control and error diagnosis
- seismic measurements
- vibration measurements
- safety engineering
- dynamic measurement of position and velocity
technical specifications
| type | bdk3 | bdk10 | bdk100 |
| measuring range | ±3g (ca.±30m/s2) | ±10g (ca.±100m/s2) | ±100g (ca.±1000m/s2) |
| resolution | <10-3g | <5·10-3g | <5·10-2g |
| frequency range | 1....300hz | 1....800hz | 1....1500hz |
| sensitivity at ub = 5volt | appr.150mv/g | appr.60mv/g | appr.15mv/g |
| temperature drift of sensitivity | <+6·10-2 % / k | ||
| temperature drift of zero point | <0.1mv/k | ||
| zero offset | (2.5±0.1)volt - generally: 0.5ub±4% | ||
| output impedance | approx. 100 ohm | ||
| linearity deviation | <1% | ||
| transverse sensitivity | <1% | ||
| mechanical overload resistance in direction of measurement | approx.10 000g (appr.100 000m/s2) ! | ||
| nominal supply voltage (regulated) | ubn = 5volt | ||
| permissible supply voltage range | ubz=2v ... 16v | ||
| current drawn at ub = 5v | approx. 2ma | ||
| degree of protection | ip65 | ||
| operating temperature | -40°c ... +85°c | ||
| storage temperature | -45°c ... +90°c | ||
| weight in stainless steel housing with thread without cable | approx. 17gramm | ||
| weight in small housing without cable | approx. 7gramm | ||
| standard electrical connection | 3 highly flexible, color-coded wires ø1mm length approx.18 cm (special lengths on request) | ||
| alternative electrical connection for sensors in stainless steel housing | 0.5m strong, flexible, shielded cable, 2 wires + shield, ø2.1mm (special lengths on request) | ||
本产品的加工定制是否，品牌是SEIKA，型号是BDK3,BDK10,BDK100，种类是加速度，制作工艺是集成，输出信号是模拟型，防护等级是IP65，线性度是1（%F.S.），灵敏度是150mV/g,60mV/g,15mV/g，漂移是0.1mV/K，分辨率是0.001g,0.005g,0.05g
联系方式
- 地址：深圳 深圳市龙华新区龙华街道办和平路366号人保大厦403
- 邮编：518109
- 电话：(0755)
- 联系人：卢文忠
- 手机：13088822223
- 传真：86 0755 26562233
- QQ：1718294505
- Email：1718294505@qq.com